Being Seen, Kingston Artist, Portia Chapman

Overview of Being Seen: The Site-Specific, Interactive, Glowing Rawhide Installation by Kingston Artist Portia “Po” Chapman

Across the eight-week run of my solo exhibition, โ€œBeing Seen: when Being Seen… we glow,โ€ hosted at the Kingston Arts Council (KAC) Pocket Gallery inside the Tett Centre for Creativity and Learning from July 27 to September 18, 2026, every design choice, technical calculation, and studio experiment returned to this truth: sculptural installation art directs movement, invites interaction, and speaks directly to the human experience.

Immersive site-specific installation "Being Seen: when Being Seen... we glow" featuring the monochromatic Glow Chamber, glowing rawhide vessels, vinyl wall text, and photo board inside the Kingston Arts Council Pocket Gallery.
The site-specific Glow Chamber on view inside the Kingston Arts Council Pocket Gallery during the immersive exhibition, “Being Seen: when Being Seen… we glow.”

When visitors walked out of the Tett Centreโ€™s limestone corridors and stepped across the Pocket Gallery threshold, they entered an environment that felt warm, welcoming, and effortless. Yet, that seamless emotional experience was the direct result of six months of intensive studio research, site-specific planning, structural engineering, optical light testing, and strict logistical scheduling. Not only did this solo exhibition require careful structural pre-planning, it required psychological research into how human beings react to contemporary urban isolation, and interact with glowing organic membranes, as well as physical urban spaces. My mission was to create a piece that achieved its goal of the public experiencing the positive glowing feeling of Being Seen once again, and in some cases, for the first time. The organic result was that the Glow Chamber became a vehicle of wellness over the 8 week run of the exhibition.

This comprehensive overview of the entire lifecycle of Being Seen and its central showstopper, the Glow Chamber, illustrates 3 things that every installation artist comes to know:
1/ Research is imperative.
2/ There is complexity in simplicity.
3/ The intended viewer reaction must remain in focus.


An art installation rarely begins at the gallery door. At its most powerful, an installation begins breathing long before a viewer steps into the room. When designing the print media for Being Seen: when Being Seen… we glow, I refused to treat posters, rack cards, business cards, and directional signs as passive marketing flyers or basic commercial advertising. Instead, I developed print media as an active, contemporary material of the installation itself, a physical and emotional bridge connecting the busy summer streets of downtown Kingston directly to the intimate interior of Room 115 in the Tett Centre.

1. Visual Identity and the Golden Glow Anchor

The entire visual identity was built upon a single, unedited night photograph taken outside my Kingston art studio. The photo captured me holding the first, successful illuminated rawhide vessel with its golden glow lighting up my face.

Kingston artist Portia Po Chapman holding a glowing illuminated rawhide frame drum at night outside a brick studio wall, radiating a warm golden light across her face and red shirt.
The original night photograph outside the Portia “Po” Chapman’s Kingston art studio that inspired the entire visual identity, warm glow, and colour palette for “Being Seen: when Being Seen… we glow.”

By anchoring all promotional print materials to this exact photograph, every poster, rack card, and digital announcement shared a high-contrast black backdrop and warm golden palette that visitors would later encounter inside the central Glow Chamber. This created a recognizable visual breadcrumb trail throughout the city, promising warmth, connection, and visibility.

2. The Physical Trail from Downtown to Foyer

As visitors walked from downtown Kingston shops, past the Isabel Bader Centre for the Performing Arts, and into the Tett Centre, the density of print materials steadily increased:

Feature landscape image of Kingston artist Portia Po Chapman smiling in a pink tinsel hat and branded shirt while holding a Being Seen exhibition poster in downtown Kingston.
Feature image of Portia “Po” Chapman sharing exhibition posters in downtown Kingston, connecting street-level community promotion directly to the Being Seen installation experience.
  • Street-Level Posters: Displayed in local shop windows and public boards to catch the eye of everyday pedestrian traffic.
  • Branded Apparel: On downtown promotion walks, I wore a custom black t-shirt printed with bright gold lettering matching the exhibition title wall, paired with a joyful tinsel hat. This outfit acted as a conversational icebreaker, turning casual sidewalk encounters into the very first note of the exhibition experience.
  • Directional Signage and Posters: Positioned at the main entrances of the Tett Centre to welcome arriving guests and guide them down the stone hallway toward the Pocket Gallery.
  • Tactile Takeaways: Inside the dark gallery space, takeaway rack cards and business cards were placed beneath an illuminated bison rawhide drum like hidden treasures, allowing visitors to take a physical piece of the golden atmosphere home with them.
Kingston artist Portia Po Chapman standing in the Tett Centre main foyer beside an exhibition directional sign, wearing a custom black t-shirt displaying her website address against the sunset over the Kingston waterfront.
Po looks out over the Kingston waterfront from the main foyer of the Tett Centre, standing beside a directional sign for the Being Seen opening reception while wearing a custom team t-shirt featuring her website domain, loveartbypo.ca .

By weaving print media, personal presence, and spatial design into one connected ecosystem, I proved that a poster can transcend advertising to become the initial threshold of the artwork itself.


Creating an interactive installation requires an artist to engage in direct conversation with a physical space. Initial room dimensions rarely reveal the practical challenges or true architectural personality of a building. Before building anything in my Kingston woodshop, I built a complete 3D computer CAD model based on structural blueprints, followed by an essential on-site fitting using a full-scale 1:1 pink paper floor template.

Kingston artist Portia Po Chapman holding a large pink paper arch template in front of the Tett Centre for Creativity and Learning.
Kingston artist Portia Po Chapman arriving at the Tett Centre with her full-scale paper template to test accessibility and spatial constraints for the Glow Chamber.

1. Navigating Architectural Constraints

The KAC Pocket Gallery presented several real-world architectural challenges:

  • An off-centre structural metal pillar located near the windows and sliding display wall
  • Tight doorway clearance and specific sight-lines from the public hallway
  • Hanging spotlights
  • Strict accessibility guidelines requiring a wide, unobstructed path for wheelchair maneuverability
  • L-shaped gallery windows to the Tett hallway
  • A dedicated passage from the main entrance to the KAC offices
  • Freshly painted black gallery walls
  • The humid summer weather
  • The potential for the public to sit on and touch the Glow Chamber
  • The limited gallery space.

By laying out the pink paper floor template inside the empty gallery, I trimmed perimeter arcs and cut custom notches around the metal pillar. This step allowed me to solve spatial conflicts on paper before making a single cut in expensive lumber.

2. Structural Engineering in the Woodshop

Back in the woodshop, these physical requirements directed the fabrication process:

  • The Integrated Plinth Base: To ensure total structural stability across the concrete gallery floor, I built a base using two staggered-seam layers of laminated plywood. This double-layer construction eliminated weak joints and provided a solid, wobble-free foundation.
  • Vertical Stud Monolith Skeleton: Secured vertical 2×3 wood studs formed the integrated plinth frame as well as a core internal skeleton for seven hollow MDF monolith structures to vertically slide over.
  • Vertical Height Clearances: Because ceiling spotlights limited overhead room, the central monolith was designed to stand at exactly 6 feet 2 inches. This height maximized human scale and visual impact while allowing a safe clearance gap beneath the overhead gallery spotlighting.
Artist Portia Po Chapman standing proudly next to three tall, hollow MDF monolith structures mounted on a wooden base in her studio.
Kingston artist Portia Po Chapman standing with the first hollow MDF monolith structures, engineered for accessibility and tailored to gallery height constraints.

3. Engineering Brutalist Urban Tension

To help visitors feel the warmth of being seen, I deliberately created the exterior of the structure to simulate a cold, grey, concrete city street.

The seven monoliths were covered in custom-cut stone-hybrid panels and the plinth top with subway tiles (that I cut and shaped in my shop), flexible oak-look wrapping, and hand-troweled foam-plaster paint textures (giving the impression of broken stone or blocks), turning them into brutalist, concrete-like structures. Highlighted by cool grey strip lighting under the plinth topโ€™s edge and a muted grey caution sign reading “when Being Unseen… we fade,” this artificial grey space was designed to reflect the cold isolation of modern urban life.

By building a rigid urban environment, the structural framework created the perfect visual contrast, setting the stage for guests to step forward and feel the comforting golden warmth of the glowing rawhide vessels located near the tops of the monoliths.

The completed Glow Chamber sculpture glowing softly in the Pocket Gallery with all seven rawhide vessels illuminated against textured monoliths and business cards placed on the tiled plinth.
Illuminating Being Seen: With the stepladder removed and rawhide vessels mounted, the Glow Chamber glows warmly in the Pocket Gallery, tuned to site-specific lighting before the rest of the exhibition wall elements were installed.

As a multidisciplinary visual artist and frame-drum maker, my rawhide practice follows an intentional rule: I do not paint the faces, eyes, or skin of figures in my drum paintings. I leave the natural rawhide completely clear so that the hide itself becomes the skin of the characters. When natural sunlight passes through the back of a painted drum, the figures come alive, radiating a warm, natural glow.

For Being Seen, I needed to invent a reliable way to simulate this daylight radiance using electrical backlighting. Because an installation of this exact design had never been created before, I conducted a long series of studio experiments to find the right light source and hidden mounting hardware.

1. The Prototyping Journey: Finding the Light

  • Incandescent Bulbs: Tested for their warm hue, but even with drilled ventilation holes, the heat output caused enclosed rawhide to dry out, warp, crack, and release an unwanted scent.
  • Cool LED Strip and Rope Lighting: Efficient and cool, but created uneven light spots and harsh stripes behind the hide rather than a continuous, smooth radiance.
  • LED Flat Panel Ceiling Lights: Offered smooth diffusion, but were too expensive and restricted design choices due to fixed sizes and shapes.
  • The Solution: I selected an economical round LED ceiling fixture featuring an adjustable colour temperature switch (Soft White / Bright White / Daylight) paired with a curved, nearly opaque plastic diffusing shade. This setup produced a soft, controllable, uniform glow when a dimmer was dialled to tune the lighting intensity.

2. Rawhide Hydration and Preparation Protocols

Working in my woodshop, I unrolled deer, elk, and bison rawhides to select sections for 8-inch, 10-inch, and 12-inch light diffusers. I deliberately chose hides featuring unique scars, natural dark spots, and translucent grain patterns to tell a story through texture.

The selected hide rounds were submerged two at a time in a clean galvanized tub. Hydration timelines varied significantly by hide density: deer rawhide soaked for 12 hours, elk rawhide soaked for 24 hours, and bison rawhide soaked for 48 hours. To keep the buoyant hides under water, I weighted them with smooth river rocks. Halfway through the soak, I removed the rocks and flipped the hides. Once fully hydrated, the rawhides floated, suspended in the clear water bath.

Top-down view of rawhide circles submerged in water inside a vintage galvanized washtub, held down by river rocks during a studio soaking process by Portia Po Chapman
Inside her Kingston studio, Po submerses rough-cut rawhide rounds two at a time in a dedicated galvanized washtub, using river rocks to keep the buoyant hides submerged as they hydrate and soften.

3. The Cake Fondant Draping and Backstitch Technique

Wrapping wet rawhide around rigid plastic diffusers presented a major engineering challenge. As rawhide dries, it shrinks with immense force. My early attempts failed because pulling the hide too tighty warped the thin plastic diffusers, preventing them from twisting back onto their LED base mounts.

To solve this, I stopped fighting the hide’s natural shrinkage and invented an original three-step mounting method:

  1. Precision Drilling: Calculate matching hole patterns and drill pilot holes through both the plastic diffuser rim and the perimeter of the rawhide skin.
  2. Cake Fondant Draping: Calculate and cut rawhide diameter using the formula (Diffuser Diameter + [2 x Diffuser Depth] + 2 inches). Drape the wet hide loosely over the plastic dome like fondant icing over a cake, leaving soft, natural folds.
  3. Loose Backstitch Lacing: Lace synthetic sinew through pre-drilled holes with a darning needle using a flexible backstitch. This allows the hide to shrink naturally without crushing the plastic dome while forming a decorative ruffle that hides mounting hardware.
Top-down view of Kingston artist Portia Po Chapman in her studio, wearing headphones and eyeglasses, using synthetic sinew and a backstitch pattern to lace water-soaked rawhide over a pre-drilled plastic LED diffuser frame. An excessive margin of rawhide forms a ruffle, which Po intends to finger-mold and progressively trim to create a hide skirt.
Moving beyond traditional frame drum measurements and tension, Po innovates by employing an innovative backstitch lacing technique on soaked rawhide, draped loosely like fondant over a custom-drilled plastic LED diffuser. This technique allows a natural ruffle to form, which she meticulously molds and trims into a hide skirt to perfectly obscure the fixture hardware.

4. Hand-Sculpting and Electrical Conversion

The laced vessels were moved to a wire drying rack in my woodshop. Because hide rested against a solid plastic shade, drying took longer than open frame drums. During drying, I hand-sculpted the ruffles, shaping decorative folds as the hide hardened.

To prepare the fixtures for gallery installation, I converted the hardwired LED ceiling lights into plug-in lamp units using transparent Wago Lever-Nut connectors. All monolith lighting cables threaded down through internal pass-through holes and plugged into a hidden central power bar controlled by a master dimmer switch, allowing gallery staff to easily adjust illumination levels.

On July 31, 2026, just three days after the show opened, a bright full moon rose in the night sky, matching the golden warmth engineered inside the studio.

Side profile photograph showing a translucent deer rawhide vessel monolith-mounted inside a warm glow chamber, detailing the structural stitch pattern, gathered edge skirting, and internal illumination.
Side profile view of a monolith-mounted deer rawhide vessel inside the Glow Chamber, showcasing its intricate stitch pattern, gathered edge skirting, and warm backlighting during Being Seen: when Being Seen… we glow.

The galleryโ€™s main title wall served as the visitorโ€™s first contact point. Originally, I planned to mount a massive full bison rawhide across the wall. However, exact spatial measurements revealed the wall was too small for a bison hide. Pivoting quickly, I selected a pristine natural deer rawhide from my studio collection whose proportions matched the entry layout perfectly.

Stage 1: Studio Rehydration and Perimeter Framing

Rawhide arrives from suppliers tightly rolled, stiff, and unyielding. To transform rigid skin into a smooth gallery canvas I employed the following steps in my studio:

  1. Sanitization: I washed and disinfected a large tub to remove all soaps, oils, or residue that could stain the natural skin.
  2. Hydration: The deer rawhide unrolled underwater as it absorbed moisture, soaking for 24 hours until completely pliable.
  3. Wall-Stretching: The wet hide was lifted onto a flat studio wall, stretched taut, and nailed around its perimeter. Drying under tension produced a flat hide.
Visual artist Portia Po Chapman leaning over a large, unrolled natural elk rawhide on a flat wooden workspace in her studio, preparing materials for custom frame drum cutting and installation features
Visual artist Portia Po Chapman unrolling a large elk rawhide on a studio work surface to assess material quality and measure dimensions for exhibition features and glowing rawhide vessels.

Stage 2: Hardware Engineering and Safety

  • Edge Finishing: Because dried rawhide sets with firm, glass-sharp edges, I trimmed the perimeter with tinsnips to remove sharp corners and keep visitors safe as they walked past it in the gallery.
  • Pilot Holes: Mounting points were measured and pre-drilled through natural structural nodes in the skin.
  • Custom Floating Mounts: To keep the hide from sitting flat against the drywall, I innovated a custom standoff mount using cut copper pipe spacers paired with brass star-headed screws. This offset allowed gallery light to pass behind translucent sections, casting deep drop shadows that made the hide appear to float off the wall.

Stage 3: Protected Transit Logistics

Transporting a wide, rigid rawhide sheet without folding or creasing required clear vehicle packing. Boxed lighting vessels were loaded into the trunk first to build a level base, followed by heavy moving blankets laid over the boxes to create a cushioned surface. The flat deer hide was laid flat on top of the blankets, covered with an extra protective layer to shield it during transport.

Visual artist Portia Po Chapman smiling in the open back hatch of a vehicle, pointing to a large, flattened natural deer rawhide laid carefully over a protective blanket for transport.
Po preparing the flattened deer rawhide and boxed vessels in her vehicle for transport to the Kingston Arts Council Pocket Gallery.

Stage 4: Mounting onto the Title Wall

Inside the Pocket Gallery, two of my volunteer assistants held the hide in place against the dark wall while I marked pilot holes onto the drywall. After setting heavy-duty wall anchors, we secured the brass screws and copper spacers using a cordless impact driver.

Mounted directly under gold vinyl lettering reading “when BEING SEEN… we glow,” the floating hide captured gallery lighting, highlighting its deer hide form, translucent grain, warm amber tones, and rich drop shadows.

A large, natural deer rawhide mounted on a dark gallery wall beneath gold vinyl lettering reading 'when BEING SEEN... we glow', floating off the wall using copper pipe spacers.
The completed title wall for Being Seen: when Being Seen… we glow, featuring a natural deer rawhide floating off the dark wall surface using custom copper pipe spacers.

The natural, golden atmosphere of the Glow Chamber looked effortless to gallery visitors. However, that seamless experience was built on six months of structural research and careful delivery logistics. Every component was thoughtfully created around clear threshold dimensions, transport limits, and quick assembly timelines.

1. Designing for Transit and Clearances

  • Plinth Base Levelling: To guarantee that the plinth base rested flat on concrete floors without wobbling, I flipped the wooden base upside down outside my studio and sanded the lower edges level using a belt sander.
  • Doorframe Clearances: The height from the bottom plinth to the top of the 2X3 interior monolith pillars was calculated to clear standard metal doorframes throughout the Tett Centre.
  • The Slippery Slide Wrap: The outer sides of the plinth base were wrapped in smooth, durable oak-grain vinyl, allowing the heavy base to slide across interlocking foam floor tiles without scratching gallery floors and the Glow Chamber.
Kingston artist Po Chapman bending down in the Tett Centre hallway to position colourful interlocking foam tiles while watching for passersby before sliding the Glow Chamber plinth toward the gallery doorway.
Navigating the Tett Centre hallway: Po lays interlocked sponge tiles to pivot and slide the heavy Glow Chamber plinth toward the KAC Pocket Gallery entrance, keeping a watchful eye for public foot traffic.

2. Gallery Assembly Sequence

Moving and assembling the structural components followed a strict step-by-step sequence:

  1. Unload Plinth Top First: Carry the circular tiled plinth top from the U-Haul truck and lean it safely against the gallery wall, exposing pre-wired LED perimeter tape underneath.
  2. Slide Main Base Through Hallway: Unload the heavy plinth base, laying colourful interlocking foam tiles across corridor floors to slide the base through doors into Room 115.
  3. Pillar Integration: Spin the base into position and lock its custom notch around the gallery’s structural metal pillar, providing direct access to electrical outlets.
  4. Alternate Monolith Installation: Bring in seven textured monolith structures from the truck, setting the tall central monolith first and alternating outwardaround the plinth.
  5. Wiring and Dimmer Tuning: Mount lighting diffusers using a stepladder, thread power cords down through pre-drilled access holes, and plug cables into the hidden power bar connected to the custom dimmer switch box.

By designing components around real-world transport limits, two people assembled the complete physical installation safely in about 1hr.

The illuminated Glow Chamber sculpture alongside a custom back-lit elk rawhide drum inside the Kingston Arts Council Pocket Gallery, framed by gallery windows, structural pillar, and entrance.
The Glow Chamber illuminated on site in the Pocket Gallery alongside a custom back-lit elk rawhide drum, set against the black walls and architectural features of the space.

The formal opening ceremony on July 30, 2026, was planned to align with the summer Buck Moon, coinciding with the peak of the Southern delta Aquarid meteor shower and a morning planetary alignment of Saturn, Mars, and Venus. This celestial timing brought natural rhythms directly into the exhibition narrative.

1. Welcoming Space and Curated Refreshments

Outside the Tett Centre entrance along the Kingston waterfront, I greeted arriving visitors beside directional signs as sunset turned the sky lavender and pink. Inside Room 115, KAC Program Administrator Felicia Holmes opened the evening, welcoming guests into the KACโ€™s cozy “Living Room” seating setup.

The refreshment table mirrored the show’s material themes, featuring a galvanized tub filled with ice and SanPellegrino (referencing rawhide soaking tubs), spring water, and homemade treats baked by my mother, including family-recipe “Aunt-Ethel” brown sugar cookies and miniature taffy tarts shaped like glowing rawhide wall drums.

The exhibition refreshment table featuring homemade brown sugar cookies, miniature taffy tarts, spring water, and iced SanPellegrino in a galvanized tub at Portia Po Chapman's Being Seen opening reception.
The thoughtfully curated refreshment table at the Being Seen opening reception features family-recipe brown sugar cookies, miniature taffy tarts reminiscent of backlit rawhide drums, and iced SanPellegrino in a galvanized metal tub.

2. Inspiration Talk and Full Moon Drumming

During my artist talk, I shared the personal origin of the project: reflecting on the isolation of 2020โ€“2021 inside my studio overlooking the Bay of Quinte, I recalled an afternoon when the noonday sun streamed through one of my elk rawhide frame drums, casting a golden light across the room that dissolved my loneliness. In that glowing moment, I once again felt seen. That moment inspired the Glow Chamber so others could feel that same sense of warmth and visibility.

Later in the evening, a live musician performed a full moon vocal and moose frame drum song, filling the gallery with serene acoustic sound. To conclude the ceremony, as a sign of my deep appreciation, I presented my chief volunteer and sister, Jazz, with a bespoke bison rawhide frame drum built on a steam-bent red oak rim.

Kingston artist Portia Po Chapman raising her hands and looking upward while telling the story of the sunlight inspiration behind the Being Seen exhibition during her opening talk.
Po gestures with arms raised to recount how a moment of sunlight illuminating an elk rawhide drum inspired the concept of Being Seen, addressing guests gathered in the Kingston Arts Council space.

Modern public life faces a quiet crisis: widespread social isolation and a sense of invisibility. Modern city dwellers often experience detachment, moving through crowded streets while feeling unacknowledged and unseen. The Glow Chamber was engineered as a direct response to this isolation, utilizing spatial psychology, light physics, and biological materials to encourage somatic safety and mutual visibility.

1. Confronting Brutalist Isolation and Experiential Avoidance

Sociologist Georg Simmel described the “blasรฉ attitude” as an emotional defence mechanism adopted by city dwellers to cope with sensory overload (Simmel 2016). People tune out their surroundings and avoid eye contact to protect themselves from urban stress.

This dynamic was highlighted during the exhibition by visitors’ reaction to the grey caution sign mounted on the rear framework reading “When being unseen… we fade.” Positioned against cold grey subway tiles, almost no visitors spoke about the sign. Those who did noted a clear feeling of discomfort.

In clinical psychology, this behavior is known as experiential avoidanceโ€”the automatic human drive to turn away from uncomfortable emotional truths (Hayes et al. 1996). Visitors turned away from the cold sign and moved toward the glowing rawhide vessels, demonstrating Roger Ulrichโ€™s Stress Recovery Theory: hard monochromatic surfaces increase stress, while warm biological materials encourage physical relaxation (Ulrich 1979).

“When feeling unseen… we fade.” AI rendering of people feeling unseen on a concrete urban street even though there are many people to see each other.

2. Biological Light Transmission and Somatic Womb Memory

Standard amber light bulbs fail to create a deep emotional response because artificial light stays flat and uniform. The transformation occurred when light passed through untanned animal rawhide.

  • Subsurface Light Scattering: In optical physics, subsurface scattering describes how light penetrates a translucent material, bounces through micro-structures, and scatters outward (Gigilashvili et al. 2021). Human visual processing recognizes subsurface scattering as the signature of living tissue. When light passes through rawhide collagen fibres and vein structures, the brain interprets the radiance as a warm, living presence.
  • Implicit Somatic Memory: Visitors frequently described the Glow Chamber as feeling like a comforting, safe womb. While adults have no conscious memory of early development, the somatosensory nervous system retains implicit memory of intrauterine warmth and filtered light (Fagard et al. 2018). Light scattered through biological hide acts as a somatic key, unlocking pre-verbal memories of safety, containment, and belonging.
Close-up of artist Portia Po Chapman's face, smiling and illuminated by the warm, golden glow of a translucent rawhide drum within the immersive "Being Seen" installation.
Portrait of Portia Po Chapman engaging the Glow Chamber’s golden glowing rawhide vessel by Kingston portrait artist Ann Decker at the Kingston Arts Council Pocket Gallery exhibition “Being Seen.”

3. Engineering Eye-Level Face-to-Face Encounter

Varying the heights of the monoliths produced an unexpected psychological reaction: visitors naturally sought out and stood before vessels that matched their exact height.

  • Facial Pareidolia: Human visual processing is attuned to facial patterns via the fusiform face area. Because natural hide features irregular shadows and organic lines, viewers experienced spontaneous pareidolia, projecting friendly facial contours onto the glowing domes.
  • Eye-Level Parity: Looking up or down creates subtle power dynamics. Eye-level alignment eliminates vertical dominance, signalling equal peer-to-peer recognition. Standing face-to-face with a vessel scaled to their height allowed visitors to feel recognized – to feel like they were being seen.
  • The Blue-Base Upward Anchor: Hidden blue LED strip lighting along the plinth base anchored the floor plane while prompting the viewer’s eyes to travel upward toward the warm amber vessels, mirroring an emotional shift from urban isolation to golden warmth.

4. Historical Artistic Lineages

While my practice stands on its own distinct ground, Being Seen enters into a deliberate dialogue with historical and contemporary precursors:

  • Jeffrey Gibson: Utilizes stretched rawhide with vibrant colour-blocking, though focusing on exterior surface narrative rather than immersive subsurface backlighting (Berlo 2018).
  • Eva Hesse: Pioneered post-minimalist translucent polymers and latex to evoke visceral vulnerability and somatic containment (Lippard 1992).
  • Rebecca Belmore: Employs hide and natural membranes to address voice and political visibility, using hide as an acoustic megaphone rather than an optical receiver (Augaitis et al. 2018).
  • Wolfgang Laib: Constructs immersive chambers illuminated by warm light through beeswax walls, though lacking individualized, eye-level relational encounters (Ottmann 2000).
  • James Turrell: Manipulates spatial light frequencies, whereas the Glow Chamber grounds abstract optical phenomena into tangible biological textures (Adcock 1990).

The ultimate proof of the Glow Chamber’s success came from active community participation. Inside the gallery, an interactive photo board, curated by me, invited visitors to post instant-camera photo stickers alongside handwritten notes describing their experiences.

By the close of the show on September 18, 2026, 70 community members had added their portraits to the living display. Surrounded by brutalist grey surfaces yet held by the golden light of the rawhide vessels, visitors moved from passive viewers to active participants in a shared artwork.

A black display board framed in gold with the gold vinyl title "when BEING SEEN... we glow" at the top and "Let's glow together. Add your glowing photo here!" at the bottom, covered with instant sticker selfies of visitors inside the Glow Chamber installation by Kingston artist Portia Po Chapman.
Community in full glow: artist in Kingston Portia Po Chapman created an interactive photo board where 70 exhibition guests posted instant sticker selfies taken inside the Glow Chamber installation.

The Glow Chamber demonstrates that art can transcend aesthetic contemplation to become a technology of healing. By engineering an environment that honours human biological memory, utilizes the optical metamorphosis of subsurface scattering, and rejects urban alienation in favour of eye-level relational attunement, the immersive, interactive art installation offered visitors a rare sanctuary: a place where the quiet weight of invisibility is lifted, and where the human spirit, warmed by organic light, is safely reassembled. As captured on the title wall beneath our guiding axiom: “when Being Seen… we glow.”

Close-up view of the black exhibition title wall featuring gold typography reading "when BEING SEEN... we glow", an illuminated circular rawhide piece labeled "Born Me", an artist inspiration text panel, and a mounted deer rawhide skin.
Title wall view of Being Seen: when Being Seen… we glow at the Kingston Arts Council Pocket Gallery, featuring translucent deer rawhide, gold dimensional typography, and integrated didactic narrative lettering.

Works Cited

Adcock, Craig. James Turrell: The Art of Light and Space. University of California Press, 1990.

Augaitis, Daina, et al. Rebecca Belmore: Beauty of a Fierce Longing. Art Gallery of Ontario / Information Office, 2018.

Berlo, Janet Catherine. “Jeffrey Gibson: Like a Hammer.” Denver Art Museum Review, vol. 42, no. 2, 2018, pp. 88โ€“95.

Bowers, T. “Gaze Perception under Vertical Asymmetries in Illumination.” Scientific Reports, vol. 14, 2024, p. 13111.

Fagard, Jacqueline, et al. “Fetal Origin of Sensorimotor Behavior.” Frontiers in Neurorobotics, vol. 12, 2018, p. 23. https://doi.org/10.3389/fnbot.2018.00023.

Gehl, Jan. Life Between Buildings: Using Public Space. Translated by Jo Koch, Island Press, 2011.

Gerstel, Sharon E. J. “The Iconography of Light in Sacred Architecture.” Studies in Byzantine and Medieval Art, 2020, pp. 231โ€“45.

Gigilashvili, Davit, et al. “Translucency Perception: A Review.” Journal of Vision, vol. 21, no. 8, 2021, p. 4. https://doi.org/10.1167/jov.21.8.4.

Groarke, Jenny M., et al. “Loneliness and Social Disconnection in the COVID-19 Era: The Impact of Psychological Interventions.” Journal of Affective Disorders, vol. 285, 2021, pp. 335โ€“47. https://doi.org/10.1016/j.jad.2021.02.045.

Hartgerink, Chris H. J., et al. “The Ordinal Effects of Ostracism: A Meta-Analysis of 120 Cyberball Studies.” PLOS ONE, vol. 10, no. 5, 2015, p. e0127002. https://doi.org/10.1371/journal.pone.0127002.

Hayes, Steven C., et al. “Experiential Avoidance and Behavioral Disorders: A Functional Dimensional Approach to Diagnosis and Treatment.” Journal of Consulting and Clinical Psychology, vol. 64, no. 6, 1996, pp. 1152โ€“68. https://doi.org/10.1037/0022-006X.64.6.1152.

Kozinets, Robert, Ulrike Gretzel, and Anja Dinhopl. “Self in Art/Self As Art: Museum Selfies As Identity Work.” Frontiers in Psychology, vol. 8, 2017, p. 731. https://doi.org/10.3389/fpsyg.2017.00731.

Laubin, Reginald, and Gladys Laubin. The Indian Tipi: Its History, Construction, and Use. 2nd ed., University of Oklahoma Press, 1989.

Leder, Helmut, et al. “A Model of Aesthetic Appreciation and Aesthetic Judgments.” British Journal of Psychology, vol. 95, no. 4, 2004, pp. 489โ€“508. https://doi.org/10.1348/0007126042369811.

Lippard, Lucy R. Eva Hesse. Da Capo Press, 1992.

Loades, Maria Elizabeth, et al. “Rapid Review: The Impact of Social Isolation and Loneliness on the Mental Health of Children and Adolescents in the Context of COVID-19.” Journal of the American Academy of Child & Adolescent Psychiatry, vol. 59, no. 11, 2020, pp. 1218โ€“39. https://doi.org/10.1016/j.jaac.2020.05.009.

McKenna-Plumley, Phoebe E., et al. “โ€œItโ€™s a Feeling of Complete Disconnectionโ€: Experiences of Existential Loneliness from Youth to Older Adulthood.” BMC Psychology, vol. 11, no. 1, 2023, p. 408. https://doi.org/10.1186/s40359-023-01452-4.

Murata, Shinya, et al. “Psychological Distress and Loneliness Beyond the Acute Phase of the COVID-19 Pandemic.” Psychiatry Research, vol. 305, 2021, p. 114164. https://doi.org/10.1016/j.psychres.2021.114164.

Murray, Scott. Translucent Building Skins: Materiality, Light, and Space in Contemporary Architecture. Routledge, 2013.

Ottmann, Klaus. Wolfgang Laib: A Retrospective. American Federation of Arts, 2000.

Prizeman, Katie, Netta Weinstein, and Ciara McCabe. “Effects of Mental Health Stigma on Loneliness, Social Isolation, and Relationships in Young People with Depression Symptoms.” BMC Psychiatry, vol. 23, no. 1, 2023, p. 527. https://doi.org/10.1186/s12888-023-04991-7.


The creator, Portia “Po” Chapman (BFAH, B.Ed, OCT, ACE), of “Being Seen: when Being Seen… we glow” immersive art exhibition and the interactive Glow Chamber installation is a Kingston based Rawhide & Colour Blocking Artist / Site-Specific Installation & Mural Specialist.

Discover her public murals, gallery exhibitions, and studio practice at loveartbypo.ca.

Let Me Know What You Think! Start or Join the Convesation

โ† Back

Contact Email Confirmation

Hi, Po here! Thanks for sending me an email. I will get back to you within a few days. Have a beautiful day!

Serving Kingston, Ontario & Across Canada


Behind the Art, Behind the scenes, Kingston Artist, Portia Chapman

Preparing, Moving and Mounting Deer Rawhide for the โ€œBeing Seenโ€ Title Wall | Kingston Artist Portia โ€œPoโ€ Chapman

When visual artist Portia โ€œPoโ€ Chapman set out to build Being Seen: when Being Seen… we glow at the Kingston Arts Council (KAC) Pocket Gallery inside the Tett Centre for Creativity and Learning, every element was designed to honour material purity, spatial harmony, and high-level craftsmanship. While the interactive Glow Chamber with illuminated rawhide vessels anchored the centre of the room, the galleryโ€™s title wall served as the visitorโ€™s thresholdโ€”a vital first contact point setting the tone for the entire exhibition.

To evoke the glowing feeling of being seen, Po found it to be essentially important for the public to build a relationship with other beings. The glow emitted by the drums and vessels was due to backlit rawhide – rawhide that was once lived real animal hide. To celebrate the raw beauty and organic warmth of the being, Po originally envisioned mounting a massive, full bison rawhide across the main entry wall. However, during early site visits and spatial measurements, it became clear that the wallโ€™s dimensions would not accommodate even an elk rawhide.

Kingston artist Portia Po Chapman smiling as she reaches across a massive, fully unrolled natural elk rawhide covering an entire dining room table to demonstrate its immense size and scale.
Po demonstrating the impressive size of an unrolled elk rawhideโ€”a visual scale that prompted her to pivot to a deer rawhide for the KAC Pocket Gallery title wall.

Po pivoted to her studio collection, carefully selecting a pristine natural deer rawhide whose proportions aligned perfectly with the spatial constraints and didactic museography.

The completed black exhibition title wall for "when Being Seen... we glow" by Kingston artist Portia Po Chapman, featuring gold vinyl lettering, a full deer rawhide mounted 1.5 inches off the wall with copper pipe spacers, an artist statement, and an egg-shaped illuminated silver deer rawhide drum.
The completed interior title wall for “Being Seen: when Being Seen… we glow” by artist in Kingston Portia Po Chapman, showcasing the floating full deer rawhide.

What followed was a multi-stage process of material preparation, mounting experimentation, protective transport, and meticulous gallery installation.

Stage 1: Studio Rehydration and Perimeter Framing

Rawhide arrives from suppliers tightly rolled, stiff, and unyielding. Before a hide can be assessed for dimensional layout or circular drum cutting, it must be carefully unrolled and flattened on a large, smooth work surface.

Visual artist Portia Po Chapman leaning over a large, unrolled natural elk rawhide on a flat wooden workspace in her studio, preparing materials for custom frame drum cutting and installation features
Po unrolling a large elk rawhide on a studio work surface to assess material quality and measure dimensions for exhibition’s glowing rawhide vessels.

To transform the rigid deer rawhide into a flat, gallery-ready canvas:

  1. Sanitization and Hydration: Po meticulously washed and sanitized a soaking tub to eliminate any residual detergent, soap, or oils that could discolour or mar the thin, organic skin. Once filled with clean water, the roll of deer rawhide was submerged. As it absorbed moisture, the skin gradually unrolled and relaxed until completely pliable. Once malleable, the hide remained submerged for the remainder of 24 hours.

  2. Wall-Stretching: The wet, fully hydrated hide was transferred to a studio gallery wall, stretched smooth, and nailed flat around its perimeter. Allowing the hide to dry under tension ensured a natural, flat planeโ€”essential for a clean, relaxed presentation against the gallery drywall.
Kingston artist Portia Po Chapman standing smiling beside a large, wet-soaked natural deer rawhide nailed flat against a studio wall to stretch and dry uniformly.
Po standing beside a fully hydrated whole deer rawhide, carefully stretched and nailed to a studio wall to dry flat for the title wall of Being Seen: when Being Seen… we glow.

Stage 2: Hardware to Enhance Beauty while AssuringVisitor Safety

Once fully dry and rigid, the rawhide underwent a series of technical modifications designed for both structural stability and guest safety:

  • Edge Finishing: Because natural rawhide dries with firm, glass-sharp edges, Po hand-trimmed the perimeter with dedicated tinsnips. This step eliminated snags, ensuring guests walking past the title wall could move freely without catching clothing or brushing against sharp corners.

  • Pre-Drilled Mounting Points: Pilot holes were measured and drilled directly into the corners and strategic, structural anchor points of the hide.

  • Custom Copper Pipe Spacers: To prevent the hide from resting flat and lifeless against title wall’s drywall, Po innovated a floating mount using custom-cut copper pipe spacers paired with brass star-headed screws. This spatial offset allowed light to pass behind the translucent skin, casting deep, dramatic drop shadows and creating the illusion that the hide was floating effortlessly off the wall.
A close-up view of Portia Po Chapman's hand holding a trial assembly showing a brass star-headed screw passing through a drilled hole in a trimmed deer rawhide corner and a copper pipe spacer.
A test fit of the mounting hardware featuring a brass star-headed screw, trimmed deer rawhide, and custom copper pipe spacer designed to offset the hide from the gallery wall.

Stage 3: Protected Transit Logistics

Transporting a large, rigid, non-foldable rawhide sheet from the studio to the KAC Pocket Gallery required careful vehicle packing to prevent creasing or surface damage:

  • Sub-Floor Stability: The boxed, illuminated rawhide vessels were loaded first into the rear of Poโ€™s vehicle, creating a firm, flat sub-floor across the trunk bed.

  • Layered Cushioning: Heavy protective blankets were laid smooth over the boxes – providing a steady but cushioned surface that was ideal for the deer rawhide to rest.

  • Flat Transit: The flattened deer rawhide was placed atop the blankets, resting flat across their entire surface, during transit without risk of folding or stress marks. To assure that the rawhide did not lift upwards like a kite in the breeze, another blanket was place on top of the hide and the windows remained shut while being transported to the gallery.
Visual artist Portia Po Chapman smiling in the open back hatch of a vehicle, pointing to a large, flattened natural deer rawhide laid carefully over a protective blanket for transport.
Po preparing the flattened deer rawhide and boxed vessels in her vehicle for transport to the Kingston Arts Council Pocket Gallery.

Stage 4: Mounting the Deer Rawhide onto the Title Wall

Upon arriving at the side entrance to the Tett Centre, Po and her studio assistants carried the flat hide into the Pocket Gallery to begin the final installation:

  1. Pilot Transfer: The team held the hide in place against the dark gallery wall while marking each pre-drilled screw position directly onto the wall surface.

  2. Anchor Installation: The hide was set safely aside on a protective floor blanket while drywall anchors were set into the marked locations.

  3. Team-Assisted Driver Mounting: With two assistants holding the rawhide in precise alignment, Po used her cordless impact driver to secure the brass star screws and copper pipe spacers into the wall anchors.
Portia Po Chapman, Kingston artist, using a power drill to fasten a large, flattened natural deer rawhide onto a dark gallery wall using brass screws and custom copper pipe spacers.
Po mounting the prepared deer rawhide onto the title wall at the Kingston Arts Council Pocket Gallery using brass star screws and copper pipe spacers.

The Final Reveal: Floating Rawhide and Didactic Harmony

Mounted beneath the gold vinyl title lettering reading “when BEING SEEN… we glow,” the finished deer rawhide stands as a testament to the intersection of artisanal tradition and studio precision. The copper spacers lift the hide off the dark background, capturing and reflecting gallery spotlighting to highlight the organic grain, translucent golden tones, and rich spatial shadows of the hide.

By treating the title wall not merely as an informational backdrop, but as a fully realized, three-dimensional sculpture element, Being Seen invited visitors to pause, look closely, and step into an environment where nature and community glow together.

A large, natural deer rawhide mounted on a dark gallery wall beneath gold vinyl lettering reading 'when BEING SEEN... we glow', floating off the wall using copper pipe spacers.
The completed title wall for Being Seen: when Being Seen… we glow, featuring a natural deer rawhide floating off the dark wall surface using custom copper pipe spacers.

About the Artist

Portia โ€œPoโ€ Chapman is a Kingston-based multidisciplinary visual artist, muralist, and certified educator (BFAH, B.Ed, OCT) celebrated for her site-specific Storytelling Art. Honoured with the Queenโ€™s University Medal in Visual Art, Po merges traditional craftsmanshipโ€”from wet-soaked natural rawhides and steam-bent hardwood to custom spatial engineeringโ€”with bold color-blocking and digital media. Her interactive installations transform gallery spaces into warm, welcoming environments where human experience and natural beauty connect. Discover her public murals, gallery exhibitions, and creative practice at loveartbypo.ca.

Let Me Know What You Think! Start or Join the Convesation

โ† Back

Contact Email Confirmation

Hi, Po here! Thanks for sending me an email. I will get back to you within a few days. Have a beautiful day!

Serving Kingston, Ontario & Across Canada


Behind the Art, Kingston Artist, Portia Chapman

Beyond the Form: How Didactic Museography Transformed the Glow Chamber into an Interactive Experience | Kingston Artist Portia Po Chapman

A sculpture occupies space, but a true art installation creates a world. For Kingston artist Portia Po Chapman, the central Glow Chamber in her solo exhibition, Being Seen: when Being Seen… we glow, could easily have stood alone as a handcrafted rawhide sculpture. However, her creative vision extended far beyond a static physical formโ€”she set out to build a fully realized, interactive experience.

The completed black exhibition title wall for "when Being Seen... we glow" by Kingston artist Portia Po Chapman, featuring gold vinyl lettering, a full deer rawhide mounted 1.5 inches off the wall with copper pipe spacers, an artist statement, and an egg-shaped illuminated silver deer rawhide drum.
The completed interior title wall for “Being Seen: when Being Seen… we glow” by artist in Kingston Portia Po Chapman, showcasing a floating full deer rawhide, an illuminated silver deer rawhide drum, and custom Didactic Museography typography.

The crucial element that elevated this vision from sculpture to immersive installation was Didactic Museography: the intentional, strategic integration of typography, text placement, and spatial narrative design. By treating words not as afterthoughts, but as structural art materials equal to rawhide, wood, and light, the text became the essential bridge guiding viewers into a personal, participatory journey.

Side-angle view of Kingston artist Portia Po Chapman standing on a ladder inside the Pocket Gallery applying gold vinyl lettering reading "when BEING SEEN..." to the interior black title wall, with the Kingston Arts Council logo visible on the glass door frame in the foreground.
Interior setup in progress: artist in Kingston Portia Po Chapman carefully applies custom CNC-cut vinyl title decals to the dark gallery wall.

From the muted grey caution sign reading “when Being Unseen… we fade” to the warm gold title lettering and the interactive species guide, every piece of vinyl typography served a deliberate conceptual purpose.

A grey triangular caution sign reading "when Being Unseen... we fade" positioned outside the Glow Chamber installation by Kingston artist Portia Po Chapman, with a glowing golden elk rawhide drum mounted on the dark wall in the background.
A deliberate conceptual contrast by artist in Kingston Portia Po Chapman: the faded, concrete-grey caution sign reading “when Being Unseen… we fade” stands outside the Glow Chamber, set against the warm light of a handcrafted glowing elk rawhide drum.

Didactic Museography goes beyond simply delivering information; it curates an emotional arc that shapes how a viewer feels, moves, and connects with the space. As an artist in Kingston known for site-specific precision, Portia Po Chapman carefully planned the layout of every wall graphic and decal,

Close-up view of the "Rawhide Being Guide" vinyl map mounted on a laminated wood panel, showing gallery visitors the specific layout and locations of Deer, Elk, and Bison rawhide species throughout the exhibition space.
“Rawhide Being Guide” legend and floor plan: artist in Kingston Portia Po Chapman provides gallery goers with a visual map detailing the exact placements of Deer, Elk, and Bison hides inside and around the Glow Chamber.

and even balancing spatial composition around fixed gallery fixturesโ€”so that the text acted as an inviting narrator. It prompted passersby in the Tett Centre hallway to pause, contemplate their own visibility, and physically step across the threshold into the glowing interior.

Exhibition Gallery Window Display with Custom Vinyl Decals โ€“ Portia Po Chapman Artist in Kingston.
Exterior view of the Pocket Gallery window at the Tett Centre: custom CNC-cut vinyl graphics by artist in Kingston Portia Po Chapman frame the view of the Glow Chamber and caution sign inside.

The transformative power of this approach was reflected in the overwhelming community response. Throughout the show at the Pocket Gallery, gallery goers repeatedly remarked on how deeply the written narrativesโ€”from the personal reflection in “Poโ€™s Inspiration” to the origin tales in “3 Empowering Drum Hide Stories”โ€”resonated with them.

Close-up view of the white vinyl artist statement graphic on the dark title wall, titled "when BEING SEEN... we glow: Po's Inspiration," detailing Kingston artist Portia Po Chapman's story of finding light and joy through glowing rawhides.
“Po’s Inspiration” artist statement on the interior title wall: artist in Kingston Portia Po Chapman shares the personal story behind creating her interactive glowing rawhide installation.
Close-up view of the black didactic wall graphic panel titled "3 Empowering Drum Hide Stories" by Kingston artist Portia Po Chapman, describing the origin stories for her featured glowing rawhide drums: Wounded but Strong, Born Me, and Not a Second.
“3 Empowering Drum Hide Stories” wall panel: artist in Kingston Portia Po Chapman shares the individual narratives and meanings behind three featured glowing rawhide drums.

The text gave voice to the deer, elk, and bison hides, turning natural materials into powerful mirrors for human resilience. Without these carefully crafted words, the Glow Chamber would have been an impressive visual structure; with them, it became a communal experience that invited over 70 visitors to add their own glowing portraits to the interactive selfie board, proving that thoughtful typography is key to making art truly felt and shared.

A black display board framed in gold with the gold vinyl title "when BEING SEEN... we glow" at the top and "Let's glow together. Add your glowing photo here!" at the bottom, covered with instant sticker selfies of visitors inside the Glow Chamber installation by Kingston artist Portia Po Chapman.
Community in full glow: artist in Kingston Portia Po Chapman created an interactive photo board where 70 exhibition guests posted instant sticker selfies taken inside the Glow Chamber installation.

Beyond the conceptual framework, the true art lives in the physical execution and attention to detail. A closer look at the behind-the-scenes preparation and gallery window installation reveals how these narrative layers were carefully brought to life. From the close-up views of the custom-cut vinyl typography to the interactive QR codes, social media callouts, and spatial maps, every single graphic element was hand-applied and purposefully placed.

Close-up view of a scannable QR code decal on the Pocket Gallery window at the Tett Centre, titled "About the Artist & Exhibition 'Being Seen'" with dates July 27 โ€“ Sept 18, 2026, and the invitation "Come Inside It's Your Time to Glow" by Kingston artist Portia Po Chapman.
Close-up detail of the interactive QR code window decal facing the Tett Centre hallway, inviting visitors to scan for details about Kingston artist Portia Po Chapman and the “Being Seen” exhibition.

The following collection of close-up images captures these precise didactic components in detailโ€”offering a transparent, step-by-step look at how thoughtful text, strategic window placement, and hands-on craftsmanship transformed the Kingston Arts Council Pocket Gallery into an inviting, fully connected experience for every visitor passing through the Tett Centre for Creativity and Learning.

Close-up view of the bottom center gallery window decal at the Tett Centre reading "Interactive Glowing Rawhide Installation Featuring the Beauty of Deer, Elk & Bison" by Kingston artist Portia Po Chapman, with the base of the Glow Chamber visible in the background.
Close-up detail of the vinyl decal on the bottom centre gallery window: artist in Kingston Portia Po Chapman highlights the rawhide species featured within the interactive Glow Chamber installation.
Exterior wide-angle view of the Pocket Gallery corner glass windows at the Tett Centre displaying exhibition vinyl typography and a scannable QR code poster for exhibition details by Kingston artist Portia Po Chapman.
Corner exterior view of the Pocket Gallery at the Tett Centre in Kingston, Ontario: vinyl decals and an interactive QR code poster invite passersby to explore exhibition details for Portia Po Chapman’s interactive rawhide installation.
Close-up view of the bottom right gallery window at the Tett Centre displaying artist Portia Po Chapman's white Instagram decal @loveartbypo positioned directly beneath the permanent purple Pocket Gallery logo.
Strategic placement by artist in Kingston Portia Po Chapman: her Instagram handle @loveartbypo sits directly below the permanent Pocket Gallery logo, inviting visitors to view ongoing updates and installation media online.

Behind the Scenes Photos

Overhead view of Kingston artist Portia Po Chapmanโ€™s studio workbench displaying the triangular grey "when Being Unseen... we fade" caution sign alongside golden vinyl lettering on transfer paper during the creation of her interactive installation.
Behind the scenes in the Kingston art studio: artist Portia Po Chapman prepares the vinyl typography and grey caution sign reading “when Being Unseen… we fade” for the Glow Chamber installation.
View from inside the gallery showing Kingston artist Portia Po Chapman on a stepladder applying gold vinyl typography reading "when Being Seen... we glow" onto the outer hallway window at the Tett Centre.
Installation in progress: artist in Kingston Portia Po Chapman carefully applies the gold vinyl title sticker onto the gallery window pane prior to the exhibition opening.
Side-angle view of Kingston artist Portia Po Chapman standing on a ladder inside the Pocket Gallery applying gold vinyl lettering reading "when BEING SEEN..." to the interior black title wall, with the Kingston Arts Council logo visible on the glass door frame in the foreground.
Interior setup in progress: artist in Kingston Portia Po Chapman carefully applies custom CNC-cut vinyl title decals to the dark gallery wall.
Kingston artist Portia Po Chapman standing beside a stepladder in the Tett Centre hallway, smiling proudly next to the freshly applied gold vinyl title decal "when Being Seen... we glow" on the gallery window.
Artist in Kingston Portia Po Chapman poses beside her ladder after finishing the application of the gold vinyl exhibition title decal on the Pocket Gallery hallway window.

The Immersive Show Stopper of “Being Seen: when Being Seen… we glow,
The GLOW CHAMBER

Interactive Glow Chamber installation featuring semi-circular partition walls mounted with circular, illuminated rawhide vessels casting a warm golden glow.
The interactive Glow Chamber from Portia “Po” Chapmanโ€™s exhibition when BEING SEEN… we glow, featuring backlit rawhide vessels radiating the natural golden warmth of sunlit rawhide.

Portia Po Chapman is a Kingston-based visual artist, muralist, and educator (BFAH, B.Ed, OCT) recognized for her signature high-contrast aesthetic and site-specific installations. Combining natural materials like hand-sculpted rawhide with modern digital fabrication and Didactic Museography, she crafts immersive, community-driven experiences that invite viewers into active dialogue with the work. Discover more of her portfolio, public artworks, and upcoming exhibitions at loveartbypo.ca.

Let Me Know What You Think! Start or Join the Convesation

โ† Back

Contact Email Confirmation

Hi, Po here! Thanks for sending me an email. I will get back to you within a few days. Have a beautiful day!

Serving Kingston, Ontario & Across Canada